JL / JT / JK: ST Dual Rate Pneumatic Front Sway Bar
JL / JT / JK: ST Dual Rate Pneumatic Front Sway Bar.
- - We need our sway bars on the highway for the added stability they provide, but disconnecting them for the trail has always been a hassle.
- - Includes wiring, 6mm air lines, ARB-style switch, and solenoid for easy operation.
- - Arms and torsion bars are e-dipped for corrosion resistance.
- - Lock/release assembly housing is made from hard anodized aluminum
Fitment and Installation Notes
- - The TeraFlex ST Dual Rate Pneumatic Sway Bar requires just 50 PSI to actuate, well within the capacity of most small air compressors.
- - Requires an onboard air compressor 50 PSI minimum
Description
JL / JT / JK: ST Dual Rate Pneumatic Front Sway Bar.
- - We need our sway bars on the highway for the added stability they provide, but disconnecting them for the trail has always been a hassle.
- - Includes wiring, 6mm air lines, ARB-style switch, and solenoid for easy operation.
- - Arms and torsion bars are e-dipped for corrosion resistance.
- - Lock/release assembly housing is made from hard anodized aluminum
Fitment and Installation Notes
- - The TeraFlex ST Dual Rate Pneumatic Sway Bar requires just 50 PSI to actuate, well within the capacity of most small air compressors.
- - Requires an onboard air compressor 50 PSI minimum
JL / JT / JK: ST Dual Rate Pneumatic Front Sway Bar.
Jeepers have had a love hate relationship with their sway bars, because disconnecting them for the trail has always been a hassle. The TeraFlex ST Dual Rate Pneumatic Sway Bar eliminates the problem with a simple push of a button, offering seamless transitions between on-road stability and off-road flexibility.
We need our sway bars on the highway for the added stability they provide, but disconnecting them for the trail has always been a hassle. TeraFlex's ST Dual Rate Pneumatic Sway Bar solves the problem with the push of a button.
Fitment and Installation Notes
- - Includes wiring, 6mm air lines, ARB-style switch, and solenoid for easy operation.
- - Arms and torsion bars are e-dipped for corrosion resistance.
- - Lock/release assembly housing is made from hard anodized aluminum
- - Features hardened internal engagement contact points
- - Protective lip seals to guard against water and debris.
- - Machined torsion bar splines ensure perfect alignment with link arm splines for smooth engagement.
- - Hardened trail bar cap provides added strength for off-road use
- - Direct bolt up installation
- - Dual Rate 4140 chromoly torsion bars
- - Fitment: JL/JT/JK Wrangler & Gladiator
- - Height: 8
- - Installation Time: 1 Hour + Air Compressor Installation (If Required)
- - Length: 40
- - Product Image Size: Default
- - Note: Requires an onboard air compressor 50 PSI minimum
- - Featured: No
- - Width: 17
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
ADDITIONAL SERVICES & COSTS MAY BE REQUIRED
INSTALLATION ALIGNMENT NOTE
Your vehicle may require a wheel alignment following installation to ensure proper handling and tire wear.
Additional alignment costs may apply.
INSTALLATION HEADLAMP AIM NOTE
Headlamp aim and alignment must be checked and adjusted as necessary following installation to help ensure proper visibility and the safety of other drivers.
Additional headlamp adjustment costs may apply.
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE
If your vehicle is equipped with active or passive safety, collision monitoring, or driver assistance systems, these systems must be checked and adjusted as necessary following installation.
This includes, but is not limited to, camera-based and radar-based systems that may be affected by changes in vehicle ride height or suspension geometry.
Some vehicles may require OEM diagnostic equipment and factory-trained technicians to properly recalibrate ADAS functions.
Additional ADAS calibration costs may apply.
Have a certified mechanic do it for you!
installation_video=https://www.youtube.com/embed/caqWJlzv85U?si=yD4I7pTdOg4KX_BB

